
AuCyan™ Sodium Cyanide NaCN (≥98.3%): A Technical Manual for Cyanidation Circuit Control
Dissolution chemistry, impurity-driven scaling, a seven-step dosing budget and permit-first scheduling — written for metallurgists and procurement teams running CIP, CIL, CIC, Heap leaching and Vat leaching circuits.
AuCyan™ Sodium Cyanide NaCN (≥98.3%) is a high-purity solid briquette leaching reagent for industrial gold dissolution. Three variables decide its real cost in a plant: how much of the assay reaches the ore as free cijanid, how much reagent is lost to impurity-driven side reactions and ugljenate scaling, and whether the Class 6.1 documentation chain is scheduled before the production campaign begins. Purity above 98% is not a marketing number — it changes the mass balance of the entire circuit.
Ključni zaključci
- Purity is a mass-balance input. At ≥98.3% NaCN, less of each tonne is inert carrier, so dosing calculations drift less between batches.
- Low NaOH and Na₂CO₃ reduce scaling. Controlled alkali limits carbonate deposition on pumps, pipelines, emitters and inter-stage screens where hard or saline water is recirculated.
- Insolubles at 0.02% protect dosing equipment. Ultra-low insoluble matter keeps solution make-up systems and heap emitters from plugging over a long campaign.
- Free cyanide must be measured, not assumed. A titration routine beats a fixed dosing rule whenever ore type, clay content or sulphide grade changes.
- Documentation gates production. UN 1689, Class 6.1, an End-User Certificate and verified import permits must be closed before the factory schedules the batch.
- The briquette form is a logistics decision. It survives maritime transit and inland temperature swings better than fine powder and keeps handling exposure lower at the plant.
Proizvod: AuCyan™ natrijev cijanid NaCN (≥98.3%) · Form: solid briquette · Benchmark: GB/T 19306-2003 superior grade · Transport: UN 1689, Class 6.1 dangerous goods · Documentation: End-User Certificate (EUC) plus destination import permit · Terms: FOB or CIF only · Minimum order: 18 MT per 1×20' FCL · Batch documents: COA, TDS, MSDS · Supply coverage: mining operations in more than 77 countries.
| Ispitivanje predmeta | Standard | Tipično (%) | Zašto je važno |
|---|---|---|---|
| NaCN | ≥ 98.0% | 98.3 | Free cyanide available per tonne |
| NaOH | ≤0.5% | 0.13% | Alkalinity without excess caustic |
| Na₂CO3 | ≤0.5% | 0.18% | Carbonate scaling tendency |
| Netopivi | ≤0.05% | 0.02% | Dosing line and emitter blockage |
1. What purity actually changes in the dissolution circuit
Gold dissolution in an alkaline cyanide solution follows the Elsner relationship: 4Au + 8NaCN + O₂ + 2H₂O → 4Na[Au(CN)₂] + 4NaOH. The reaction needs three things at once — free cyanide, dissolved oxygen and a protective alkaline environment, typically pH 10.5–11.5. If any one is short, the others cannot compensate. This is why a plant can raise dosing and still see flat recovery: the limiting reagent may be oxygen transfer or pH stability rather than cyanide mass.
The assay figure decides how much of the delivered tonne participates in that reaction. A lower-grade product carries more inert salt and more alkali, so a dosing pump set from a nominal recipe under-delivers free cyanide. Operators then compensate by raising the set-point, which pushes excess reagent into side reactions with copper, iron, arsenic and sulphide minerals. Higher purity narrows that correction loop and makes the consumption curve predictable across batches.
In practice the difference shows up in three places: the dissolution rate in the first hours of leaching, the residual cyanide in the tailings stream, and the reagent spend per tonne of ore. All three are measurable, and all three should be tracked against the batch COA rather than against a generic datasheet.
2. Four failure modes driven by impurities
2.1 Excess alkali and pH drift
Free NaOH is needed to keep the circuit out of the acidic range where hydrogen cyanide can form, but excess caustic consumes reagent without dissolving gold and accelerates the precipitation of metal hydroxides that coat particle surfaces. A controlled NaOH level keeps alkalinity in band with less lime correction.
2.2 Carbonate scaling
Sodium carbonate builds up as cyanide degrades and as carbon dioxide enters with make-up water. In hard or saline recirculating water it deposits on impellers, pump casings, pipeline walls, heap emitters and carbon screens. Scale reduces flow, distorts residence time and creates blind spots in the leach circuit. Low initial Na₂CO₃ delays the onset; regular monitoring keeps the cleaning interval predictable.
2.3 Insoluble blockage
Insolubles do not dissolve. They accumulate in strainers, dosing nozzles and drip emitters, and on long heap campaigns they change the distribution of solution across the pad. Uneven wetting produces channeling, poor recovery in dry zones and misleading composite samples. Ultra-low insolubles are therefore a hydraulic control, not just a purity statistic.
2.4 Cyanide-consuming gangue
Copper minerals, pyrrhotite, arsenopyrite and partially oxidised sulphides form stable cyanocomplexes and thiocyanate. The reagent is not wasted by the gold reaction but by the mineralogy. When a plant changes ore source or blend, the consumption baseline must be re-established with bottle roll or column tests rather than carried over from the previous block.
3. Tutorial: build a NaCN dosing budget in seven steps
- Karakterizirajte rudu. Record head grade, clay fraction, sulphide and copper content, and the particle size distribution reaching the leach feed. These four parameters set the expected side-reaction demand.
- Run a bottle roll test at the intended pH and pulp density, sampling dissolved gold and free cyanide at 2, 6, 12 and 24 hours. Plot the curve rather than reading only the endpoint.
- Fix the free-cyanide target for the circuit — a working band, not a single number — and define the titration method used to verify it, typically silver nitrate titration with an appropriate indicator.
- Convert to kg/t of ore. Translate the laboratory consumption into a plant dosing rate using pulp density and throughput, then add a defined allowance for gangue demand.
- Build the addition profile. Front-load the dose where the dissolution curve is steep, taper it as the curve flattens, and avoid a flat continuous feed that wastes reagent in the final hours.
- Verify against the batch COA. Compare the actual assay of the delivered lot with the assumption used in step 3, and correct the pump set-point if the NaCN assay differs.
- Close the record loop. Log consumption, residual cyanide, dissolved oxygen, pH and recovery against each lot. Batch COA, TDS and MSDS should sit next to that log so deviations can be traced to a specific delivery.
This budget is a living document. A brownfield expansion, a new ore block or a change in make-up water quality resets at least one of the seven inputs, so the budget should be reviewed whenever the circuit feed changes.
4. Tablica rješavanja problema
| Simptom | Vjerojatni uzrok | Prva provjera |
|---|---|---|
| Slow dissolution, flat recovery | Oxygen transfer or pH limiting, not cyanide mass | Dissolved oxygen, pH profile, grind size |
| Consumption rising at same grade | New gangue or copper-bearing blend | Ore mineralogy, thiocyanate in solution |
| Scale on pumps and screens | Carbonate build-up, hard make-up water | Water hardness, Na₂CO₃ trend, cleaning interval |
| Dosing line or emitter plugging | Insolubles or precipitated salts | Strainer residue, insoluble assay on COA |
| pH drifting downward | Acidic ore, insufficient alkalinity control | Lime addition, NaOH on COA, buffering capacity |
| High residual cyanide in tails | Over-dosing after dissolution plateau | Addition profile, titration frequency |
5. Permit-first scheduling: the commercial constraint
Sodium cyanide is classified as UN 1689, Class 6.1 dangerous goods. Before a production slot is reserved, the destination import permit and the End-User Certificate must be verified. Dangerous-goods booking, packaging, inland transfer and port acceptance all sit behind that gate. Teams that build the documentation chain into the project calendar avoid idle reagent, missed campaigns and demurrage; teams that treat it as post-order paperwork absorb the cost later.
United Chemical zalihe AuCyan™ natrijev cijanid NaCN (≥98.3%) factory-direct at 18 MT MOQ under FOB or CIF terms, with batch COA, TDS and MSDS issued per lot. Where a cyanide permit is the binding constraint, evaluate AuLeach™ sredstvo za ispiranje zlata (GDA) – neopasno as a common-chemical route. For the adsorption stage, pair the leach circuit with AuCarb™ aktivni ugljen od kokosove ljuske za oporavak zlata (tvrdoća ≥99%).
6. Where the three products sit in one flowsheet
| Stadij | Proizvod | Varijabla odluke |
|---|---|---|
| Otapanje / ispiranje | AuCyan™ natrijev cijanid NaCN (≥98.3%) | Purity, free-cyanide control, permit status |
| Adsorpcija / oporavak | AuCarb™ aktivni ugljen od kokosove ljuske za oporavak zlata (tvrdoća ≥99%) | Hardness, K/R values, attrition, mesh cut |
| Alternativni put ispiranja | AuLeach™ sredstvo za ispiranje zlata (GDA) – neopasno | Common-chemical classification, pH band, ore validation |
AngloGold Ashanti announced on 5 November 2026 a three-year brownfield programme of US$750 million to US$900 million across Geita (Tanzania), Siguiri (Guinea), Cuiabá (Brazil) and Obuasi (Ghana), targeting at least 400,000 additional ounces of annual output by 2030. Geita alone is guided toward roughly 600,000 oz/y against 492,000 oz in 2025. Brownfield expansions of this kind do not replace the leaching circuit — they raise throughput on an existing footprint, which makes reagent consistency and delivery scheduling more valuable, not less. Izvor: ažuriranje i najava proširenja tvrtke za treći kvartal 2026., 5. studenog 2026.
7. Često postavljana pitanja
Q1. Why specify NaCN ≥98.3% instead of a commodity grade?
Because the assay directly sets the free cyanide delivered per tonne. A tighter assay reduces dosing correction, limits side reactions and keeps the consumption curve stable across lots.
Q2. Which impurity matters most for a hard-water CIL plant?
Na₂CO₃, because carbonate scaling affects pumps, pipelines, emitters and screens. NaOH controls alkalinity, and insolubles control blockage — all three appear on the batch COA.
Q3. What pH band should a cyanidation circuit hold?
Typically pH 10.5–11.5. Below that the protective alkaline environment degrades; far above it reagent is consumed without dissolving additional gold.
Q4. How is free cyanide measured in the plant?
By routine titration of the leach solution, commonly with silver nitrate and an appropriate indicator, sampled at defined points rather than inferred from the dosing pump set-point.
Q5. Why does consumption rise when the ore source changes?
Copper minerals, sulphides and clay form cyanocomplexes or adsorb reagent. The baseline must be re-established with bottle roll or column tests for each new blend.
Q6. What documents are required before an order ships?
A verified destination import permit and an End-User Certificate, plus the dangerous-goods documentation for UN 1689, Class 6.1. Batch COA, TDS and MSDS accompany each lot.
P7. Koji su Incoterms dostupni?
Za ovu liniju proizvoda primjenjuju se FOB ili CIF uvjeti.
Q8. What is the minimum order?
18 MT per 1×20' FCL, supplied factory-direct with a single documentation standard across the order.
Q9. Why is the briquette form preferred over powder?
It holds up through maritime transit and inland temperature swings and reduces handling exposure during make-up at the plant.
Q10. Can AuCyan™ be evaluated alongside a non-hazardous route?
Yes. Where the cyanide permit chain is the binding constraint, AuLeach™ Gold Leaching Agent (GDA) – Non-Hazardous is evaluated against the same ore with its own pH and dosage validation.
Q11. How should a first order be qualified technically?
Against the batch TDS and COA, with laboratory validation on the plant's own ore and a defined free-cyanide control band before the FCL campaign begins.
Q12. Which adsorption product completes the circuit?
AuCarb™ Gold Recovery Coconut Shell Activated Carbon (≥99% Hardness), selected by K/R value, attrition limit and mesh cut for the duty of the specific CIP or CIL stage.
8. Tehničko štivo i interne poveznice
AuCyan™ Sodium Cyanide product page · Pregled Zlatnog trokuta · Tehnički pregled triju proizvoda · Sodium cyanide technical reference · AuCarb™ activated carbon guide · AC50 specification · AC55 specification · AC60 specification · BC1100 specification · AuLeach™ GDA product page · Leaching reagents reference · Česta pitanja o kemikalijama · Novosti
Request a quotation, TDS and batch COA, or discuss a dosing budget for your ore: Kontaktirajte nas · WhatsApp +86 173 9270 5576 · info@unitedchemicalcn.com
- Nasumični sadržaj
- Vrući sadržaj
- Vrući sadržaj s recenzijama
- Stručnjak za fleksibilne odnose s kupcima i dobavljačima (: Indonezija)
- Digitalni elektronički detonator(vrijeme odgode 0~ 16000ms)
- Kalijev permanganat – industrijski stupanj
- Tiourea 99% visoke aktivnosti Profesionalni proizvođač
- Industrijski natrijev nitrit 98.5%
- Kako odabrati pravi reagens za flotaciju?
- Postoje li posebni propisi za korištenje rudarskih kemikalija?
- 1Sniženi natrijev cijanid (CAS: 143-33-9) za rudarstvo - visoka kvaliteta i konkurentne cijene
- 2Natrijev cijanid 98.3% CAS 143-33-9 NaCN sredstvo za prekrivanje zlata, neophodno za rudarsku kemijsku industriju
- 3Novi kineski propisi o izvozu natrijevog cijanida i smjernice za međunarodne kupce
- 4Natrijev cijanid (CAS: 143-33-9) Certifikat krajnjeg korisnika (kineska i engleska verzija)
- 5Međunarodni kodeks upravljanja cijanidom(natrijevim cijanidom) - Standardi prihvaćanja rudnika zlata
- 6Kineska tvornica sumporne kiseline 98%
- 7Bezvodna oksalna kiselina 99.6% industrijske kvalitete
- 1Natrijev cijanid 98.3% CAS 143-33-9 NaCN sredstvo za prekrivanje zlata, neophodno za rudarsku kemijsku industriju
- 2Visoka čistoća · Stabilne performanse · Veći oporavak — natrijev cijanid za moderno ispiranje zlata
- 3United ChemicalIstraživački tim pokazuje autoritet kroz uvide temeljene na podacima
- 4AuCyan™ visokoučinkoviti natrijev cijanid | Čistoća 98.3% za globalno rudarstvo zlata
- 5Digitalni elektronički detonator(vrijeme odgode 0~ 16000ms)
- 6Detonator s udarnom cijevi visoke čvrstoće i visoke preciznosti
- 7industrija Električni detonator






Konzultacije putem internetske poruke
Dodaj komentar: