
Adsorption Kinetics, Attrition Control and the CIP/CIL Carbon Balance
Why ≥99% hardness, a 6×12 mesh cut and ≤1.5% attrition determine how much loaded gold stays in the circuit — and how much walks out as fines.
AuCarb™ Gold Recovery Coconut Shell Activated Carbon (≥99% Hardness) is a coconut-shell granular ការបោន engineered for gold adsorption in CIP, CIL, CIC, Heap leaching and Vat leaching circuits. Its job is to pull the Au(CN)₂⁻ complex out of solution fast enough and hold it firmly enough that the carbon can be screened, eluted and reused. The three numbers that govern that job are hardness (survival under impeller shear), the K/R pair (capacity and speed) and attrition (how much loaded carbon grinds into unrecoverable fines).
ការយកសំខាន់ៗ
- Fines carry gold. Every gram of carbon that grinds below the screen aperture leaves the circuit already loaded. Attrition is a recovery loss, not a housekeeping cost.
- Hardness ≥99% is measured, not claimed. Ball-pan hardness (ASTM D3802) plus A.A.R.L. attrition give comparable numbers across suppliers.
- K sets capacity, R sets speed. A carbon with a high K value but a weak R value fills slowly and lets gold pass the last adsorption stage.
- 6×12 mesh is a hydraulic decision. A tight cut keeps inter-stage screens from blinding while preserving contact area.
- Ash ≤3.0% protects thermal reactivation. Lower ash leaves cleaner micropores after repeated kiln cycles.
- Packing is fixed. 25 kg heavy-duty laminated PE bags, moisture ≤5.0% as packed, 15 MT MOQ per 1×20' FCL.
សម្ភារៈ: សំបកដូង ក្រឡាចត្រង្គ កាបូនដែលបានធ្វើឱ្យសកម្ម · CAS 7440-44-0 · HS 3802.10 · Bulk density 0.48–0.55 g/ml · Packaging: 25 kg heavy-duty laminated PE bags · Terms: FOB or CIF · MOQ 15 MT · Documents: batch COA, TDS, MSDS.
| ប៉ារ៉ាមែត្រ | AC50 value | អ្វីដែលវាគ្រប់គ្រង |
|---|---|---|
| ការប្រទាក់ | 6 × 12 | Screen retention and contact area |
| ភាពរឹងរបស់បាល់ផេន | ≥99% | Survival under impeller shear |
| ការបាត់បង់គុណភាព (AARL) | ≤1.5% | Loaded-carbon loss to fines |
| Platelet | ≤5.0% | Screen blinding tendency |
| តម្លៃ K | ≥២៦.០ គីឡូក្រាម/តោន | Equilibrium gold loading |
| តម្លៃ R | ≥50% | អត្រាស្រូបយក |
| CTC | ≥50% | Micropore volume indicator |
| សកម្មភាពប៊ុយតាន | ≥19.5% | Pore structure confirmation |
| ផេះ | ≤3.0% | Reactivation cleanliness |
| សំណើម | ≤5.0% | Stability after sea transit |
Grade ladder: BC1100 for Heap leaching and CIC duty (≥98.5% hardness) → AC50 for standard CIP/CIL → AC55 (K ≥28 kg/t, R ≥55%) → AC60 (K ≥30 kg/t, R ≥60%, 8×16 or 6×12). Iodine number is deliberately omitted from this specification pending a single confirmed figure; CTC and Butane activity are the published pore indicators.
1. What actually happens inside an adsorption tank
Gold leaves the leach as the auroស៊ីអ៊ីតណែត complex Au(CN)₂⁻. Adsorption onto coconut shell carbon happens in three consecutive steps: transport through the liquid film surrounding the granule, diffusion into the pore network, and physical adsorption on the internal surface. The slowest step sets the observed rate. In a well-agitated CIL tank the film is thin, so pore diffusion and surface loading dominate; in a low-agitation CIC column the film can become the bottleneck.
This is why two carbons with similar equilibrium capacity behave differently in a real plant. The K value describes how much gold a tonne of carbon can hold at equilibrium. The R value describes how quickly it approaches that equilibrium. A circuit sized only on K will trail gold in solution at the final stage because the carbon never gets there within the residence time available.
Coconut shell feedstock matters here: it produces a predominantly microporous structure with high mechanical strength. That combination gives the hardness needed to survive repeated screening, pumping and elution cycles while retaining the pore volume needed for fast loading.
2. Four failure modes in the carbon circuit
2.1 Attrition and loaded-gold loss
Impellers, pumps, transfer launders and screens all abrade granules. The resulting fines pass the inter-stage screens carrying adsorbed gold and are lost to the tailings stream or to the thickener overflow. Because the gold is already on the carbon, this loss is invisible to a solution assay of the tailings — it shows up only as a gap between dissolved gold and recovered gold.
2.2 Screen blinding from platelet content
Flat platelets orient across screen apertures and blind them far faster than equant granules. Blinded screens force bypassing, short-circuiting and uneven carbon distribution between stages. Holding platelet content at ≤5.0% keeps the screen cycle predictable.
2.3 Ash build-up across reactivation cycles
Each thermal reactivation leaves inorganic residue in the pores. High initial ash accelerates the decline in adsorption rate, so the carbon must be replaced sooner. Ash ≤3.0% extends the useful number of kiln cycles and lowers the effective cost per tonne of ore treated.
2.4 Poisoning by organics and flotation reagents
Frothers, collectors, oils and humic material adsorb strongly and occupy the micropores. A circuit that changes its grinding or flotation chemistry can see a sudden drop in R value without any change in the carbon delivered. Diagnose the solution chemistry before blaming the carbon lot.
3. Tutorial: a seven-step CIP/CIL carbon balance
- Set the carbon concentration in each adsorption stage (g/L of pulp) based on tank volume and target gold loading. Record it as a range, not a single figure.
- Measure the solution tenor entering and leaving each stage. The stage-by-stage profile tells you where adsorption is actually happening.
- Compute the equilibrium loading from the K value of the selected grade and the observed solution tenor; compare it with the measured loaded carbon assay.
- Check the kinetics against the R value and the real residence time per stage. If the measured loading lags the equilibrium figure, the stage is rate-limited, not capacity-limited.
- Calculate the carbon advance rate needed to keep the loaded carbon below the elution design limit, balancing gold inventory against elution throughput.
- Quantify attrition loss by comparing carbon inventory make-up against the design ≤1.5% figure, and convert the shortfall into contained gold using the loaded-carbon assay.
- Close the loop with reactivation. Log kiln cycles, ash trend and R value after each regeneration, then set the replacement rule from the measured decline rather than from a fixed calendar.
A worked balance is plant-specific: throughput, pulp density, solution tenor and the number of stages all change the answer. The method stays the same; the inputs come from your own sampling campaign.
៤. តារាងដោះស្រាយបញ្ហា
| រោគសញ្ញា | ទំនងជាមូលហេតុ | ពិនិត្យដំបូង |
|---|---|---|
| មាសនៅក្នុងដំណោះស្រាយដំណាក់កាលចុងក្រោយ | Rate-limited adsorption, low R value or short residence | Stage profile, residence time, agitation |
| High carbon make-up rate | Attrition above design, aggressive pumping | Fines in tails, pump speed, transfer design |
| Screens blinding early | Platelet content or degraded granules | Particle shape distribution, screen aperture |
| Loading drops after flotation change | Organic poisoning of micropores | Reagent regime, solution TOC, R value retest |
| Capacity fading after kiln cycles | Ash accumulation in pores | Ash trend, reactivation temperature profile |
| Uneven carbon between stages | Screen bypass or air-lift imbalance | Stage inventory survey, advance rate |
5. Grade selection and the wider flowsheet
| កាតព្វកិច្ច | ថ្នាក់ទី | តក្កវិជ្ជាជ្រើសរើស |
|---|---|---|
| Heap leaching / CIC column | BC1100 | Lower shear, long contact, ≥98.5% hardness |
| CIP / CIL ស្តង់ដារ | AC50 | Engineering grade, K ≥26 kg/t, R ≥50% |
| CIL ដែលមានអត្រាទិន្នផលខ្ពស់ជាង | AC55 | K ≥28 គីឡូក្រាម/តោន, R ≥55% |
| High-shear / high-tenor duty | AC60 | K ≥30 គីឡូក្រាម/តោន, R ≥60%, 8 × 16 ឬ 6 × 12 |
Adsorption sits after dissolution in the flowsheet. The leach stage is covered by AuCyan™ សូដ្យូម ស៊ីយ៉ានីត NaCN (≥98.3%); where a common-chemical route is preferred, the circuit can be validated with សារធាតុចម្រាញ់មាស AuLeach™ (GDA) – មិនមានគ្រោះថ្នាក់. Sourcing all three from one manufacturer keeps test conditions, documentation and freight planning comparable.
AngloGold Ashanti's 5 November 2026 brownfield programme assigns US$480–580 million to Geita in Tanzania, targeting about 600,000 oz/y by 2030 against 492,000 oz in 2025. Q3 2026 output there was 120,000 oz, 4% lower year on year as mined grades declined. An expansion on an existing footprint raises carbon circulation and screening duty rather than introducing a new plant design — which is exactly where attrition, mesh cut and screen retention become the governing variables. Source: company Q3 2026 update and expansion announcement, 5 November 2026.
សំណួរដែលសួរជាញឹកញាប់
Q1. What does ≥99% hardness actually measure?
Ball-pan hardness, tested to ASTM D3802, measures resistance to mechanical breakdown under controlled abrasion. It predicts how well granules survive impellers, pumps and screening.
Q2. Why is attrition ≤1.5% a recovery issue rather than a cost issue?
Because the fines that break away are already loaded with gold. They pass the screens and leave the circuit, so the loss appears as a recovery gap rather than a reagent expense.
Q3. What is the difference between the K value and the R value?
K is the equilibrium loading capacity in kg of gold per tonne of carbon; R is the rate at which the carbon approaches that equilibrium. Capacity without rate leaves gold in solution.
Q4. Why specify a 6×12 mesh cut?
A tight particle size distribution keeps inter-stage screens from blinding and gives predictable hydraulic behaviour while preserving enough surface area for adsorption.
Q5. How does platelet content affect the circuit?
Flat platelets bridge screen apertures. Holding platelet at ≤5.0% keeps screening cycles stable and prevents bypassing between adsorption stages.
Q6. Why do you publish CTC and Butane activity instead of an iodine number?
Those are the confirmed pore indicators for this grade. Until a single iodine figure is settled across all site documentation, the specification relies on CTC ≥50% and Butane ≥19.5%.
Q7. What does ash ≤3.0% protect?
Thermal reactivation. Lower inorganic residue leaves cleaner micropores after each kiln cycle and slows the decline in adsorption rate.
Q8. Which grade should a standard CIL plant start with?
AC50 is the engineering grade for standard CIP/CIL duty. Move to AC55 or AC60 when throughput, tenor or shear demands a higher K/R pair.
Q9. How is carbon packed and shipped?
In 25 kg heavy-duty laminated PE bags, moisture ≤5.0% as packed, at 15 MT MOQ per 1×20' FCL under FOB or CIF terms.
Q10. Can laboratory test samples be provided?
Yes — AuCarb™ and AuLeach™ test samples are available for laboratory validation on your own ore before an FCL order is placed.
Q11. Why does loading fall after a flotation reagent change?
Frothers, collectors and oils occupy the micropores and reduce the effective adsorption rate. Check solution chemistry before attributing the drop to the carbon lot.
Q12. Which products complete the rest of the flowsheet?
AuCyan™ Sodium Cyanide NaCN (≥98.3%) for dissolution and AuLeach™ Gold Leaching Agent (GDA) – Non-Hazardous for a common-chemical leach route.
៧. ការអានបច្ចេកទេស និងតំណភ្ជាប់ផ្ទៃក្នុង
មគ្គុទ្ទេសក៍ AuCarb™ · AC50 · AC55 · AC60 · BC1100 · AC50 flagship page · ត្រីកោណមាស · AuCyan™ · AuLeach™ GDA · សារធាតុចម្រាញ់ · សំណួរដែលសួរញឹកញាប់អំពីគីមី · ដំណឹងឧស្សាហកម្ម
ទំនាក់ទំនងមកកាន់ពួកយើង · WhatsApp +86 173 9270 5576 · info@unitedchemicalcn.com
- មាតិកាចៃដន្យ
- មាតិកាក្តៅ
- មាតិកាពិនិត្យឡើងវិញក្តៅ
- អាស៊ីតនីទ្រីកប្រមូលផ្តុំឧស្សាហកម្ម 55%-68%
- សូដ្យូម Isobutyl Xanthate SIBX 90%
- ឧបករណ៍បំផ្ទុះអគ្គិសនីរញ្ជួយ (ប្រឆាំងនឹងឋិតិវន្ត ធន់នឹងទឹក)
- អាស៊ីតអាសេទិកឧស្សាហកម្ម 99.5% គ្មានពណ៌រាវ អាស៊ីតអាសេទិក
- តើសារធាតុគីមីក្នុងការជីករ៉ែមានតួនាទីអ្វីខ្លះក្នុងឧស្សាហកម្មរ៉ែ?
- តើខ្ញុំត្រូវជ្រើសរើសភ្នាក់ងារអណ្តែតទឹកត្រឹមត្រូវដោយរបៀបណា?
- តើអ្វីទៅជាការរក្សាទុក និងការប្រុងប្រយ័ត្នចំពោះការជីកយកសារធាតុគីមី?
- 1បញ្ចុះតម្លៃសូដ្យូម Cyanide (CAS: 143-33-9) សម្រាប់ការជីកយករ៉ែ - គុណភាពខ្ពស់ និងតម្លៃប្រកួតប្រជែង
- 2សូដ្យូមស៊ីយ៉ានីត 98.3% CAS 143-33-9 សារធាតុផ្សំមាស NaCN សំខាន់សម្រាប់ឧស្សាហកម្មគីមីរ៉ែ
- 3បទប្បញ្ញត្តិថ្មីរបស់ចិនស្តីពីការនាំចេញសូដ្យូមស៊ីយ៉ានត និងការណែនាំសម្រាប់អ្នកទិញអន្តរជាតិ
- 4សូដ្យូម Cyanide (CAS: 143-33-9) វិញ្ញាបនបត្រអ្នកប្រើប្រាស់ចុងក្រោយ (កំណែជាភាសាចិន និងអង់គ្លេស)
- 5កូដគ្រប់គ្រងអន្តរជាតិ Cyanide (សូដ្យូម cyanide) - ស្តង់ដារទទួលយករ៉ែមាស
- 6រោងចក្រចិន អាស៊ីតស៊ុលហ្វួរីក ៩៨%
- 7អាស៊ីត Oxalic ដែលគ្មានជាតិទឹក 99.6% ថ្នាក់ទីឧស្សាហកម្ម
- 1សូដ្យូមស៊ីយ៉ានីត 98.3% CAS 143-33-9 សារធាតុផ្សំមាស NaCN សំខាន់សម្រាប់ឧស្សាហកម្មគីមីរ៉ែ
- 2ភាពបរិសុទ្ធខ្ពស់ · ការអនុវត្តមានស្ថេរភាព · ការងើបឡើងវិញកាន់តែខ្ពស់ — សូដ្យូមស៊ីយ៉ានុតសម្រាប់ការលាងមាសទំនើប
- 3United Chemicalក្រុមស្រាវជ្រាវបង្ហាញពីសិទ្ធិអំណាចតាមរយៈការយល់ដឹងដែលជំរុញដោយទិន្នន័យ
- 4សូដ្យូម ស៊ីយ៉ានីត ដំណើរការខ្ពស់ AuCyan™ | ភាពបរិសុទ្ធ 98.3% សម្រាប់ការជីកយករ៉ែមាសសកល
- 5ឧបករណ៍បំផ្ទុះអេឡិចត្រូនិចឌីជីថល (ពេលវេលាពន្យាពេល 0 ~ 16000ms)
- 6ឧបករណ៍បំផ្ទុះបំពង់ឆក់ កម្លាំងខ្ពស់ ភាពជាក់លាក់ខ្ពស់។
- 7ឧបករណ៍បំផ្ទុះអគ្គិសនីឧស្សាហកម្ម






ការប្រឹក្សាសារតាមអ៊ីនធឺណិត
បន្ថែមមតិ៖