
Adsorption Kinetics, Attrition Control and the CIP/CIL Carbon Balance
Why ≥99% hardness, a 6×12 mesh cut and ≤1.5% attrition determine how much loaded gold stays in the circuit — and how much walks out as fines.
AuCarb™ Gold Recovery Coconut Shell Activated Carbon (≥99% Hardness) is a coconut-shell granular Anglis engineered for gold adsorption in CIP, CIL, CIC, Heap leaching and Vat leaching circuits. Its job is to pull the Au(CN)₂⁻ complex out of solution fast enough and hold it firmly enough that the carbon can be screened, eluted and reused. The three numbers that govern that job are hardness (survival under impeller shear), the K/R pair (capacity and speed) and attrition (how much loaded carbon grinds into unrecoverable fines).
Pagrindiniai skirtumai
- Fines carry gold. Every gram of carbon that grinds below the screen aperture leaves the circuit already loaded. Attrition is a recovery loss, not a housekeeping cost.
- Hardness ≥99% is measured, not claimed. Ball-pan hardness (ASTM D3802) plus A.A.R.L. attrition give comparable numbers across suppliers.
- K sets capacity, R sets speed. A carbon with a high K value but a weak R value fills slowly and lets gold pass the last adsorption stage.
- 6×12 mesh is a hydraulic decision. A tight cut keeps inter-stage screens from blinding while preserving contact area.
- Ash ≤3.0% protects thermal reactivation. Lower ash leaves cleaner micropores after repeated kiln cycles.
- Packing is fixed. 25 kg heavy-duty laminated PE bags, moisture ≤5.0% as packed, 15 MT MOQ per 1×20' FCL.
medžiaga: Coconut Shell granuliuotas Aktyvuota anglis · CAS 7440-44-0 · HS 3802.10 · Bulk density 0.48–0.55 g/ml · Packaging: 25 kg heavy-duty laminated PE bags · Terms: FOB or CIF · MOQ 15 MT · Documents: batch COA, TDS, MSDS.
| Parametras | AC50 value | Ką tai kontroliuoja |
|---|---|---|
| Tinklelis | 6 × 12 | Screen retention and contact area |
| Rutulio formos kietumas | ≥ 99% | Survival under impeller shear |
| Nusidėvėjimas (AARL) | ≤1.5% | Loaded-carbon loss to fines |
| Platelet | ≤5.0% | Screen blinding tendency |
| K vertė | ≥26 kg/t | Equilibrium gold loading |
| R value | ≥ 50% | Adsorbcijos greitis |
| BTK | ≥ 50% | Micropore volume indicator |
| Butano aktyvumas | ≥ 19.5% | Pore structure confirmation |
| Pelenai | ≤3.0% | Reactivation cleanliness |
| Drėgmė | ≤5.0% | Stability after sea transit |
Grade ladder: BC1100 for Heap leaching and CIC duty (≥98.5% hardness) → AC50 for standard CIP/CIL → AC55 (K ≥28 kg/t, R ≥55%) → AC60 (K ≥30 kg/t, R ≥60%, 8×16 or 6×12). Iodine number is deliberately omitted from this specification pending a single confirmed figure; CTC and Butane activity are the published pore indicators.
1. What actually happens inside an adsorption tank
Gold leaves the leach as the auroCianidas complex Au(CN)₂⁻. Adsorption onto coconut shell carbon happens in three consecutive steps: transport through the liquid film surrounding the granule, diffusion into the pore network, and physical adsorption on the internal surface. The slowest step sets the observed rate. In a well-agitated CIL tank the film is thin, so pore diffusion and surface loading dominate; in a low-agitation CIC column the film can become the bottleneck.
This is why two carbons with similar equilibrium capacity behave differently in a real plant. The K value describes how much gold a tonne of carbon can hold at equilibrium. The R value describes how quickly it approaches that equilibrium. A circuit sized only on K will trail gold in solution at the final stage because the carbon never gets there within the residence time available.
Coconut shell feedstock matters here: it produces a predominantly microporous structure with high mechanical strength. That combination gives the hardness needed to survive repeated screening, pumping and elution cycles while retaining the pore volume needed for fast loading.
2. Four failure modes in the carbon circuit
2.1 Attrition and loaded-gold loss
Impellers, pumps, transfer launders and screens all abrade granules. The resulting fines pass the inter-stage screens carrying adsorbed gold and are lost to the tailings stream or to the thickener overflow. Because the gold is already on the carbon, this loss is invisible to a solution assay of the tailings — it shows up only as a gap between dissolved gold and recovered gold.
2.2 Screen blinding from platelet content
Flat platelets orient across screen apertures and blind them far faster than equant granules. Blinded screens force bypassing, short-circuiting and uneven carbon distribution between stages. Holding platelet content at ≤5.0% keeps the screen cycle predictable.
2.3 Ash build-up across reactivation cycles
Each thermal reactivation leaves inorganic residue in the pores. High initial ash accelerates the decline in adsorption rate, so the carbon must be replaced sooner. Ash ≤3.0% extends the useful number of kiln cycles and lowers the effective cost per tonne of ore treated.
2.4 Poisoning by organics and flotation reagents
Frothers, collectors, oils and humic material adsorb strongly and occupy the micropores. A circuit that changes its grinding or flotation chemistry can see a sudden drop in R value without any change in the carbon delivered. Diagnose the solution chemistry before blaming the carbon lot.
3. Tutorial: a seven-step CIP/CIL carbon balance
- Set the carbon concentration in each adsorption stage (g/L of pulp) based on tank volume and target gold loading. Record it as a range, not a single figure.
- Measure the solution tenor entering and leaving each stage. The stage-by-stage profile tells you where adsorption is actually happening.
- Compute the equilibrium loading from the K value of the selected grade and the observed solution tenor; compare it with the measured loaded carbon assay.
- Check the kinetics against the R value and the real residence time per stage. If the measured loading lags the equilibrium figure, the stage is rate-limited, not capacity-limited.
- Calculate the carbon advance rate needed to keep the loaded carbon below the elution design limit, balancing gold inventory against elution throughput.
- Quantify attrition loss by comparing carbon inventory make-up against the design ≤1.5% figure, and convert the shortfall into contained gold using the loaded-carbon assay.
- Close the loop with reactivation. Log kiln cycles, ash trend and R value after each regeneration, then set the replacement rule from the measured decline rather than from a fixed calendar.
A worked balance is plant-specific: throughput, pulp density, solution tenor and the number of stages all change the answer. The method stays the same; the inputs come from your own sampling campaign.
4. Troubleshooting table
| Simptomai | Tikėtina priežastis | Pirmas patikrinimas |
|---|---|---|
| Gold in final-stage solution | Rate-limited adsorption, low R value or short residence | Stage profile, residence time, agitation |
| High carbon make-up rate | Attrition above design, aggressive pumping | Fines in tails, pump speed, transfer design |
| Screens blinding early | Platelet content or degraded granules | Particle shape distribution, screen aperture |
| Loading drops after flotation change | Organic poisoning of micropores | Reagent regime, solution TOC, R value retest |
| Capacity fading after kiln cycles | Ash accumulation in pores | Ash trend, reactivation temperature profile |
| Uneven carbon between stages | Screen bypass or air-lift imbalance | Stage inventory survey, advance rate |
5. Grade selection and the wider flowsheet
| Pareiga | Klasė | Pasirinkimo logika |
|---|---|---|
| Heap leaching / CIC column | BC1100 | Lower shear, long contact, ≥98.5% hardness |
| Standartinis CIP / CIL | AC50 | Engineering grade, K ≥26 kg/t, R ≥50% |
| Higher-throughput CIL | AC55 | K ≥28 kg/t, R ≥55% |
| High-shear / high-tenor duty | AC60 | K ≥30 kg/t, R ≥60%, 8×16 or 6×12 |
Adsorption sits after dissolution in the flowsheet. The leach stage is covered by AuCyan™ natrio cianidas NaCN (≥98.3 %); where a common-chemical route is preferred, the circuit can be validated with „AuLeach™“ aukso išplovimo priemonė (GDA) – nepavojinga. Sourcing all three from one manufacturer keeps test conditions, documentation and freight planning comparable.
AngloGold Ashanti's 5 November 2026 brownfield programme assigns US$480–580 million to Geita in Tanzania, targeting about 600,000 oz/y by 2030 against 492,000 oz in 2025. Q3 2026 output there was 120,000 oz, 4% lower year on year as mined grades declined. An expansion on an existing footprint raises carbon circulation and screening duty rather than introducing a new plant design — which is exactly where attrition, mesh cut and screen retention become the governing variables. Source: company Q3 2026 update and expansion announcement, 5 November 2026.
6. Dažnai užduodami klausimai
Q1. What does ≥99% hardness actually measure?
Ball-pan hardness, tested to ASTM D3802, measures resistance to mechanical breakdown under controlled abrasion. It predicts how well granules survive impellers, pumps and screening.
Q2. Why is attrition ≤1.5% a recovery issue rather than a cost issue?
Because the fines that break away are already loaded with gold. They pass the screens and leave the circuit, so the loss appears as a recovery gap rather than a reagent expense.
Q3. What is the difference between the K value and the R value?
K is the equilibrium loading capacity in kg of gold per tonne of carbon; R is the rate at which the carbon approaches that equilibrium. Capacity without rate leaves gold in solution.
Q4. Why specify a 6×12 mesh cut?
A tight particle size distribution keeps inter-stage screens from blinding and gives predictable hydraulic behaviour while preserving enough surface area for adsorption.
Q5. How does platelet content affect the circuit?
Flat platelets bridge screen apertures. Holding platelet at ≤5.0% keeps screening cycles stable and prevents bypassing between adsorption stages.
Q6. Why do you publish CTC and Butane activity instead of an iodine number?
Those are the confirmed pore indicators for this grade. Until a single iodine figure is settled across all site documentation, the specification relies on CTC ≥50% and Butane ≥19.5%.
Q7. What does ash ≤3.0% protect?
Thermal reactivation. Lower inorganic residue leaves cleaner micropores after each kiln cycle and slows the decline in adsorption rate.
Q8. Which grade should a standard CIL plant start with?
AC50 is the engineering grade for standard CIP/CIL duty. Move to AC55 or AC60 when throughput, tenor or shear demands a higher K/R pair.
Q9. How is carbon packed and shipped?
In 25 kg heavy-duty laminated PE bags, moisture ≤5.0% as packed, at 15 MT MOQ per 1×20' FCL under FOB or CIF terms.
Q10. Can laboratory test samples be provided?
Yes — AuCarb™ and AuLeach™ test samples are available for laboratory validation on your own ore before an FCL order is placed.
Q11. Why does loading fall after a flotation reagent change?
Frothers, collectors and oils occupy the micropores and reduce the effective adsorption rate. Check solution chemistry before attributing the drop to the carbon lot.
Q12. Which products complete the rest of the flowsheet?
AuCyan™ Sodium Cyanide NaCN (≥98.3%) for dissolution and AuLeach™ Gold Leaching Agent (GDA) – Non-Hazardous for a common-chemical leach route.
7. Technical reading and internal links
AuCarb™ guide · AC50 · AC55 · AC60 · BC1100 · AC50 flagship page · "Auksinis trikampis" · AuCyan™ · „AuLeach™“ rekomenduojama paros norma · Leaching reagents · DUK apie chemines medžiagas · Pramonės Naujienos
Kontaktai · „WhatsApp“ +86 173 9270 5576 · info@unitedchemicalcn.com
- Atsitiktinis turinys
- Karštas turinys
- Karštas apžvalgos turinys
- Pramoninė koncentruota azoto rūgštis 55–68 %
- Natrio izobutilksantatas SIBX 90%
- Seisminis elektrinis detonatorius (antistatinis, atsparus vandeniui)
- Pramoninė acto rūgštis 99.5 % bespalvė skysta Ledinė acto rūgštis
- Kokį vaidmenį kasybos chemikalai atlieka kasybos pramonėje?
- Kaip pasirinkti tinkamą flotacijos reagentą?
- Kokios yra kasybos cheminių medžiagų saugojimo ir tvarkymo atsargumo priemonės?
- 1Natrio cianidas su nuolaida (CAS: 143-33-9) kasybai – aukšta kokybė ir konkurencinga kaina
- 2Natrio cianidas 98.3% CAS 143-33-9 NaCN aukso padažo priemonė, būtina kasybos chemijos pramonei
- 3Nauji Kinijos natrio cianido eksporto reglamentai ir gairės tarptautiniams pirkėjams
- 4Natrio cianidas (CAS: 143-33-9) Galutinio vartotojo sertifikatas (versija kinų ir anglų k.)
- 5Tarptautinis cianidas (natrio cianidas) valdymo kodas – aukso kasyklos priėmimo standartai
- 6Kinijos gamykla 98% sieros rūgštis
- 7Bevandenė oksalo rūgštis 99.6 % pramoninė
- 1Natrio cianidas 98.3% CAS 143-33-9 NaCN aukso padažo priemonė, būtina kasybos chemijos pramonei
- 2Didelis grynumas · Stabilus veikimas · Didesnis išgavimo rodiklis — natrio cianidas šiuolaikiniam aukso išplovimui
- 3United ChemicalTyrimų komanda demonstruoja autoritetą, remdamasi duomenimis pagrįstomis įžvalgomis
- 4„AuCyan™“ didelio našumo natrio cianidas | 98.3 % grynumo, skirtas pasaulinei aukso kasybai
- 5Skaitmeninis elektroninis detonatorius (uždelsimo laikas 0–16000 XNUMX ms)
- 6Didelio stiprumo, didelio tikslumo smūginis vamzdinis detonatorius
- 7pramonės elektrinis detonatorius






Konsultacija internetu žinutėmis
Pridėti komentarą: