
UNITED CHEMICAL · ТЕХНОЛОГИЈА НА ПРОИЗВОДОТ · 20 НОЕМВРИ 2026
Dissolution rate is the variable most plants forget to specify
A buyer specifies assay. A metallurgist must specify dissolution. The gap between the two is where цијанид budget goes to die.
When a gold plant purchases Натриум цијанид, the purchase order usually carries a single number: purity. Yet the number that decides how many kilograms disappear per tonne of ore is how fast the briquette releases cyanide into solution, and how consistently the circuit holds a free-cyanide setpoint. A high-purity product that dissolves unevenly creates dosing lag, over-addition and WAD-cyanide excursions. A product that dissolves predictably lets the operator run closer to the theoretical minimum. This manual sets out the working parameters for specifying AuCyan™ натриум цијанид NaCN (≥98.3%) on dissolution performance rather than on paper purity alone, and gives a plant-ready method for controlling it.
1. The chemistry you are actually paying for
Gold dissolution in cyanide solution follows the Elsner equation. Four atoms of gold react with eight atoms of cyanide, one molecule of oxygen and two molecules of water to form four units of the gold-cyanide complex and four hydroxide ions:
4 Au + 8 CN⁻ + O₂ + 2 H₂O → 4 [Au(CN)₂]⁻ + 4 OH⁻
The stoichiometry is unambiguous: eight moles of cyanide per four moles of gold, or two moles of cyanide per mole of gold dissolved. In mass terms that is roughly 0.5 g of NaCN per gram of gold. A one-tonne ore stream grading 2 g/t and recovering 95% of its gold consumes only about 0.95 g of cyanide per tonne in the ideal reaction. Real plants consume hundreds of grams per tonne. The difference is not chemistry — it is everything else in the ore and the circuit.
2. Where the other 99% of cyanide goes
Understanding the consumption ledger is the single highest-value exercise in a cyanidation circuit. The theoretical gold reaction is small; the practical losses are large and divisible into five buckets.
| Loss bucket | Механизам | Контролна рачка |
|---|---|---|
| Распуштање на злато | Stoichiometric, ~0.5 g NaCN per g Au | Not controllable; the useful consumption |
| Base-metal demand | Copper, zinc, iron form stable cyano-complexes | Ore blending, pre-treatment, higher setpoint |
| Хидролиза | CN⁻ + H₂O ↔ HCN + OH⁻ below pH 10.5 | Lime addition, pH interlock |
| деградација | Oxidation to cyanate, thiocyanate formation | Avoid oxidants, control residence time |
| Physical losses | Incomplete dissolution, entrainment in tails | Briquette dissolution profile, mixing |
Златниот триаголник — три производи, еден добавувач
AuCyan™ натриум цијанид NaCN (≥98.3%) · AuCarb™ активиран јаглен со кокосова лушпа за обновување на злато (≥99% тврдост) · AuLeach™ средство за испирање на злато (GDA) – неопасен
3. Why ≥98.3% is a floor, not a target
Purity sets the ceiling on available cyanide per kilogram, but insoluble matter and slower briquette breakdown set the realised value. Unextracted cyanide leaves the circuit in the tailings or as an unreacted core, where it is paid for but never dissolves gold. A sodium cyanide product at ≥98.3% with a defined dissolution profile closes that gap. Specification should therefore carry four clauses, not one: minimum assay, dissolution time at circuit pH, maximum insoluble content and batch-to-batch variance.
4. Briquette versus flakes versus powder
| Форма | Dissolution behaviour | Plant fit |
|---|---|---|
| High-purity briquette | Controlled, predictable surface-area release | Preferred for metered CIP/CIL dosing |
| Снегулки | Fast initial release, variable sizing | Batch make-up where speed dominates |
| Прав | Very fast, dust and handling concerns | Restricted, enclosed dosing only |
5. Worked mass balance — a 3,000 t/day CIL circuit
Take a circuit treating 3,000 tonnes of ore per day at a target free cyanide of 0.25 g/L, a solution-to-solids ratio of 1.2:1 and a measured ore demand of 0.30 kg NaCN per tonne. Theoretical in-circuit inventory is 3,000 × 1.2 m³ × 0.25 kg/m³ = 900 kg. Daily ore demand is 3,000 × 0.30 = 900 kg/day. If briquette dissolution lags by one tank residence time, operators commonly add 8–12% extra to protect the setpoint. That is 72–108 kg/day of avoidable consumption, or roughly 26–39 tonnes per year. At a typical delivered price, a single percentage point of dissolution-driven over-dosing is a five-figure annual line item.
Circuit inventory: 3,000 t × 1.2 × 0.25 kg/m³ = 900 kg
Ore demand: 3,000 t × 0.30 kg/t = 900 kg/day
Lag penalty at 10%: 90 kg/day ≈ 33 t/year
6. Impurity-driven scaling and the cyanide ledger
Scaling is often treated as a mechanical problem, but in cyanidation it is a chemistry problem with a mechanical symptom. Copper, zinc and iron accumulate as cyano-complexes and can precipitate as insoluble salts on pipework, screen surfaces and Јаглерод. The practical response is threefold: characterise the ore's cyanide demand before the campaign, hold protective alkalinity so that cyanide stays as CN⁻ rather than volatile HCN, and keep a consistent product with low insoluble content so that what is dosed actually dissolves.
7. Documented, not assumed
Every shipment is supplied with a batch сертификат за автентичност, Tds МСС. Briquettes are packed in 25 кг ламинирани PE вреќи за тешка употреба. Commercial supply starts at a factory MOQ of 1×20' FCL ≈ 18 MT, под ФОБ/ЦИФ terms only. Sodium cyanide is a controlled dangerous good (UN1689, DG Class 6.1): import licence and End-Use Certificate are arranged before shipment. United Chemical is a manufacturer and global supplier of gold extraction chemicals, delivering to mining operations in more than 77 countries.
8. Табела за решавање проблеми
| Симптом | Веројатна причина | Поправна акција |
|---|---|---|
| Free CN drifting low | Dissolution lag or ore-demand spike | Verify briquette dissolution, re-run bottle roll |
| High WAD cyanide in tails | Over-dosing to protect setpoint | Tighten dosing curve, check pH |
| White precipitate on screens | Base-metal cyano-complexes | Ore blend, alkaline wash, scale review |
| Slow gold dissolution | Low oxygen or low free CN | Check aeration, restore setpoint |
| Dosing pump cavitation | Undissolved briquette fragments | Extend make-up time, verify mixing |
9. Најчесто поставувани прашања
Q1 — Why specify ≥98.3% rather than a higher number?
Because dissolution behaviour and insoluble content matter more to consumed kilograms than the last fraction of a percent of assay. ≥98.3% is a guaranteed floor with a documented dissolution profile.
Q2 — How fast should a briquette dissolve?
The right answer is site-specific. What matters is a consistent, reproducible dissolution curve at your circuit pH and temperature, so dosing can be calibrated once and held.
Q3 — What documentation ships with each lot?
A batch COA, TDS and MSDS covering assay, dissolution behaviour and handling. No other inspection arrangement is offered or implied.
Q4 — Which commercial terms are available?
FOB and CIF only, from a factory MOQ of 1×20' FCL ≈ 18 MT.
Q5 — Is the product a controlled good?
Yes. Sodium cyanide is UN1689, DG Class 6.1. Import licence and End-Use Certificate are arranged before shipment.
Q6 — Can the same supplier provide adsorption carbon?
Yes. AuCarb™ Gold Recovery Coconut Shell Activated Carbon (≥99% Hardness) is supplied from the same technical team, with batch COA, TDS and MSDS.
Q7 — What if the ore is cyanide-constrained?
AuLeach™ Gold Leaching Agent (GDA) – Non-Hazardous is the alternative route for projects where permissible cyanide use is constrained. Bottle-roll comparison is recommended before selection.
Q8 — How many countries do you supply?
More than 77 countries, under FOB/CIF terms with consistent batch documentation.
Побарајте техничка понуда
Send your ore grade, target free-cyanide setpoint and throughput. Our team returns a dissolution-matched dosage proposal with COA, TDS and MSDS.
Контактирајте нѐ · Преглед на Златниот триаголник · Референца за натриум цијанид · Најчесто поставувани прашања за хемикалии · индустрија Вести
WhatsApp +86 173 9270 5576 · info@unitedchemicalcn.com
- Случајна содржина
- Жешка содржина
- Жешка содржина на преглед
- Дитиофосфат 25S
- Калциум пероксид 60% Анализа жолтеникава таблета
- Бакар сулфат монохидрат (CuSO4-H2O) во прав (Cu: 34% Min)
- Каква улога играат рударските хемикалии во рударската индустрија?
- Што е средство за порамнување и како функционира во рударството?
- Желез хлорид (40% во вода)
- Калиум етилксантат 90% PEX
- 1Натриум цијанид со попуст (CAS: 143-33-9) за рударство - висок квалитет и конкурентни цени
- 2Натриум цијанид 98.3% CAS 143-33-9 NaCN средство за преработка на злато, неопходен за рударство и хемиска индустрија
- 3Новите регулативи на Кина за извоз на натриум цијанид и насоки за меѓународните купувачи
- 4Натриум цијанид (CAS: 143-33-9) Сертификат за краен корисник (кинеска и англиска верзија)
- 5Меѓународен код за управување со цијанид (натриум цијанид) - стандарди за прифаќање на рудникот за злато
- 6Кинеска фабрика сулфурна киселина 98%
- 7Безводна оксална киселина 99.6% индустриско одделение
- 1Натриум цијанид 98.3% CAS 143-33-9 NaCN средство за преработка на злато, неопходен за рударство и хемиска индустрија
- 2Висока чистота · Стабилни перформанси · Повисока стапка на закрепнување — натриум цијанид за модерно испирање на злато
- 3United ChemicalИстражувачкиот тим на „Студија“ демонстрира авторитет преку увиди засновани на податоци
- 4AuCyan™ високо-перформансен натриум цијанид | 98.3% чистота за глобално рударство на злато
- 5Дигитален електронски детонатор (време на доцнење 0~ 16000ms)
- 6Детонатор со ударна цевка со висока јачина и висока прецизност
- 7индустрија Електричен детонатор






Консултации преку Интернет
Додај коментар: