
One Circuit, Three Decisions: A Selection Framework for AuCyan™, AuCarb™ and AuLeach™
Leaching, adsorption and the Non-Hazardous alternative are three separate decisions. Making them against one set of test conditions is what keeps the numbers comparable.
United Chemical is a manufacturer and global supplier of gold extraction chemicals, delivering Ċjanur tas-Sodju AuCyan™ NaCN (≥98.3%), Karbonju Attivat mill-Qoxra tal-Ġewż tal-Indi AuCarb™ għall-Irkupru tad-Deheb (Ebusija ≥99%) u, Aġent tal-Lixxivjar tad-Deheb AuLeach™ (GDA) – Mhux Perikoluż to mining operations in more than 77 countries. The three products sit at three different decision points in one flowsheet: dissolution, adsorption, and the alternative leach route when the permit chain is the binding constraint. Selecting them from one manufacturer means one set of test conditions, one documentation standard and one freight plan.
Teħid ta 'Ħlas Ewlenin
- Three decisions, not one purchase. Leaching chemistry, adsorption media and the common-chemical alternative each have their own governing variables.
- AuCyan™ sets the dissolution benchmark at ≥98.3% NaCN in briquette form, with UN 1689 Class 6.1 documentation required.
- AuCarb™ governs recovery through hardness ≥99%, attrition ≤1.5%, a 6×12 mesh cut and the K/R pair across four grades.
- AuLeach™ removes a logistics constraint as a Non-Hazardous common-chemical route, but still needs ore-specific pH and dosage validation.
- One supplier makes the data comparable: one test protocol, batch COA / TDS / MSDS per lot, one FOB or CIF freight plan.
- Free laboratory test samples are available for AuCarb™ and AuLeach™ to start validation before an FCL order.
| deċiżjoni | prodott | Speċifikazzjoni ewlenija | MOQ |
|---|---|---|---|
| Dissoluzzjoni / lixxivjar | Ċjanur tas-Sodju AuCyan™ NaCN (≥98.3%) | Briquette, GB/T 19306-2003, low NaOH / Na₂CO₃ / insolubles; UN 1689 Class 6.1, EUC required | 18 MT |
| Assorbiment / irkupru | Karbonju Attivat mill-Qoxra tal-Ġewż tal-Indi AuCarb™ għall-Irkupru tad-Deheb (Ebusija ≥99%) | 6×12 mesh, attrition ≤1.5%, platelet ≤5.0%, K ≥26 kg/t / R ≥50% on AC50; 25 kg heavy-duty laminated PE bags | 15 MT |
| Rotta alternattiva ta' lixxivjar | Aġent tal-Lixxivjar tad-Deheb AuLeach™ (GDA) – Mhux Perikoluż | Common chemical, pH 10.5–12, indicative dosage 0.5–1.0 ‰, general cargo | 28 MT |
All three are supplied factory-direct under FOB or CIF terms with batch COA, TDS and MSDS. Contact: info@unitedchemicalcn.com · WhatsApp +86 173 9270 5576 · https://unitedchemicalcn.com/
1. Three products, three different questions
A gold recovery circuit is a chain of unit operations. The leaching reagent answers the question "how fast and how completely does gold leave the ore". The activated Karbonju answers "how much of that dissolved gold do we actually capture and keep". The alternative leach route answers "what happens if the permit chain, not the metallurgy, is what stops the project". These are not competing products; they occupy three different stages of the same flowsheet.
Confusing them creates bad procurement. Buying a higher-K carbon will not fix a dissolution problem. Raising the ċjanur set-point will not fix a rate-limited adsorption stage. Switching to a common-chemical reagent will not remove the need for carbon. A selection framework keeps each decision attached to its own measured variable.
2. Tutorial: a six-step selection framework
- Define the flowsheet first. CIP, CIL, CIC, Heap leaching or Vat leaching — the circuit determines which stages exist and which products are needed at all.
- Ikkaratterizza l-mineral. Head grade, mineralogy, clay, sulphide, arsenic and grind size set the dissolution demand. Run a bottle roll or column curve per feed.
- Resolve the permit question. If UN 1689 Class 6.1 documentation and an End-User Certificate can be closed on schedule, AuCyan™ Sodium Cyanide NaCN (≥98.3%) is the dissolution benchmark. If the permit chain binds, evaluate AuLeach™ Gold Leaching Agent (GDA) – Non-Hazardous against the same ore.
- Size the adsorption stage. From solution tenor and residence time, choose the carbon grade by K/R value: BC1100 for Heap / CIC, AC50 for standard CIP/CIL, AC55 or AC60 for higher-throughput or high-shear duty.
- Fix one documentation standard. Batch COA, TDS and MSDS per lot, one acceptance band, one sampling routine, and plant logs tied to lot numbers.
- Ibni l-kalendarju tal-kunsinna against the campaign or ramp curve using the 15 / 18 / 28 MT minimum order quantities, under FOB or CIF terms, with the documentation gate ahead of the first production slot.
The framework is deliberately sequential: changing the answer to step 1 or step 3 changes everything downstream. It is also reusable — the same six steps apply to a new country page, a brownfield expansion or a first-time enquiry.
3. Grade ladder and specification detail
| AuCarb™ grade | Dazju | Definizzjoni ta' parametri |
|---|---|---|
| BC1100 | Heap leaching / CIC | Hardness ≥98.5%, long contact, lower shear |
| AC50 | CIP / CIL standard | K ≥26 kg/t, R ≥50%, CTC ≥50%, Butane ≥19.5%, ash ≤3.0% |
| AC55 | CIL b'rendiment ogħla | K ≥28 kg/t, R ≥55% |
| AC60 | High-shear / high-tenor | K ≥30 kg/t, R ≥60%, 8×16 jew 6×12 |
AC50 shared parameters: 6×12 mesh, ball-pan hardness ≥99%, A.A.R.L. attrition ≤1.5%, platelet ≤5.0%, moisture ≤5.0%, bulk density 0.48–0.55 g/ml, CAS 7440-44-0, HS 3802.10. An iodine figure is not published pending a single confirmed value; CTC and Butane activity are the stated pore indicators.
4. Why one supplier changes the data quality
Sourcing all three from one manufacturer makes the numbers comparable: one set of test conditions, one documentation standard and one freight plan. When a plant deviation appears, the operator can separate ore effects from delivery effects because every lot carries its own COA, TDS and MSDS and every campaign is logged against a lot number. With three suppliers and three test protocols, the same deviation is usually argued about rather than diagnosed.
5. Tabella tas-soluzzjoni tal-problemi
| Sintomu | Wrong decision to make | Correct check |
|---|---|---|
| Dissoluzzjoni bil-mod | Buy higher-K carbon | Oxygen transfer, pH, free cyanide, grind |
| Deheb fis-soluzzjoni tal-istadju finali | Raise cyanide dosage | Carbon concentration, R value, residence time |
| Permit chain blocks the campaign | Wait and re-order | Validate AuLeach™ Non-Hazardous route on same ore |
| Kompożizzjoni tal-karbonju 'l fuq mid-disinn | Change leaching reagent | Attrition ≤1.5%, screen aperture, circulation |
| Deviation cannot be attributed | Adjust all set-points | Ore blend first, then batch COA, then set-point |
6. Mistoqsijiet Frekwenti
Q1. What does United Chemical manifattura?
AuCyan™ Sodium Cyanide NaCN (≥98.3%), AuCarb™ Gold Recovery Coconut Shell Activated Carbon (≥99% Hardness) and AuLeach™ Gold Leaching Agent (GDA) – Non-Hazardous, supplied to mining operations in more than 77 countries.
Q2. Are the three products alternatives to each other?
No. They occupy three different stages: dissolution, adsorption, and the alternative leach route when the permit chain binds.
Q3. Which product needs an End-User Certificate?
AuCyan™ Sodium Cyanide NaCN (≥98.3%), as UN 1689 Class 6.1 dangerous goods, together with verified destination import permits.
Q4. Which product ships as general cargo?
AuLeach™ Gold Leaching Agent (GDA) – Non-Hazardous, a common chemical; the buyer still confirms local common-chemical import rules.
M5. X'inhuma l-kwantitajiet minimi tal-ordni?
15-il tunnellata metrika għal AuCarb™, 18-il tunnellata metrika għal AuCyan™, 28 tunnellata metrika għal AuLeach™, kull wieħed għal kull 1×20' FCL.
M6. Liema Incoterms huma disponibbli?
Japplikaw it-termini FOB jew CIF.
Q7. Which carbon grade suits a standard CIL circuit?
AC50, the engineering grade for standard CIP/CIL duty, with K ≥26 kg/t and R ≥50%.
Q8. How is AuCarb™ packed?
In 25 kg heavy-duty laminated PE bags with moisture ≤5.0% as packed.
Q9. Can test samples be provided?
Yes — free laboratory test samples are available for AuCarb™ and AuLeach™ for ore-specific validation before an FCL order.
Q10. What documents come with each lot?
Batch COA, TDS and MSDS, filed against a delivery number so deviations are traceable.
Q11. What is the first step in selecting reagents for a new project?
Define the flowsheet (CIP, CIL, CIC, Heap leaching or Vat leaching), then characterise the ore with a bottle roll or column curve.
Q12. Why source all three from one manufacturer?
One set of test conditions, one documentation standard and one freight plan make plant deviations diagnosable and reduce qualification work.
7. Qari tekniku u links interni
Ħarsa ġenerali lejn it-Triangolu tad-Deheb · Ħarsa ġenerali teknika ta' tliet prodotti · AuCyan™ · Sodium cyanide reference · Gwida AuCarb™ · AC50 · AC55 · AC60 · BC1100 · AuLeach™ GDA · Reaġenti tal-lixxivjar · FAQs kimiċi · industrija News
Request a quotation, TDS, batch COA or laboratory samples: Ikkuntatjana · WhatsApp +86 173 9270 5576 · info@unitedchemicalcn.com
- Kontenut każwali
- Kontenut sħun
- Kontenut ta 'reviżjoni sħun
- Ammonju Klorur 99.5% Kollettur tal-Minjieri
- 99.5% min Ammonju Klorur Għall-Użu Industrijali
- Perossidu tal-kalċju 60% Assay Pillola safranija
- Aċidu Aċetiku Industrijali 99.5% Likwidu Bla kulur Aċidu aċetiku glaċjali
- Dehru Poducts Sodium Cyanide
- Sulfat tar-ram Monoidrat (CuSO4-H2O) Trab (Cu: 34% Min)
- Kif nagħżel ir-reaġent tal-flotazzjoni t-tajjeb?
- 1Sodium Cyanide skontat (CAS: 143-33-9) għall-Minjieri - Kwalità Għolja u Prezzijiet Kompetittivi
- 2Ċjanur tas-Sodju 98.3% CAS 143-33-9 Aġent għat-tqattigħ tad-deheb NaCN Essenzjali għall-Industriji Kimiċi tal-Minjieri
- 3Ir-Regolamenti l-Ġodda taċ-Ċina dwar l-Esportazzjonijiet tas-Sodium Cyanide u Gwida għal Xerrejja Internazzjonali
- 4Sodium Cyanide (CAS: 143-33-9) Ċertifikat tal-utent aħħari (verżjoni Ċiniża u Ingliża)
- 5Ċjanur Internazzjonali (Ċjanur tas-sodju) Kodiċi ta 'Ġestjoni - Standards ta' Aċċettazzjoni tal-Minjiera tad-Deheb
- 6Fabbrika taċ-Ċina Aċidu Sulfuriku 98%
- 7Aċidu ossaliku anidru 99.6% Grad Industrijali
- 1Ċjanur tas-Sodju 98.3% CAS 143-33-9 Aġent għat-tqattigħ tad-deheb NaCN Essenzjali għall-Industriji Kimiċi tal-Minjieri
- 2Purità Għolja · Prestazzjoni Stabbli · Irkupru Ogħla — ċjanur tas-sodju għal-lixxivjar modern tad-deheb
- 3United ChemicalIt-Tim ta' Riċerka Juri Awtorità Permezz ta' Għarfien Immexxi mid-Data
- 4Ċjanur tas-Sodju ta' Prestazzjoni Għolja AuCyan™ | Purità ta' 98.3% għat-Tħaffir Globali tad-Deheb
- 5Detonatur Elettroniku Diġitali (Ħin ta' Dewmien 0 ~ 16000ms)
- 6Detonatur tat-tubu tax-xokk ta 'qawwa għolja u ta' preċiżjoni għolja
- 7industrija Detonatur Elettriku






Konsultazzjoni tal-messaġġi onlajn
Żid kumment: