
UNITED CHEMICAL · ВЕСТИ ОД ИНДУСТРИЈАТА · 20 НОЕМВРИ 2026
A new gold zone moves metallurgy onto the critical path
At exploration stage, the right question is which route delivers recovery on the actual ore.
Sierra Nevada Gold reported shallow gold in the first four holes at the Central Gold Zone of its As Safra copper-gold project in Saudi Arabia, with the best intercept 57 metres at 1.15 g/t gold from 4 metres, according to Mining.com.au and Orecast, accessed 20 November 2026. The assays include 20 metres at 1.31 g/t from surface and 48 metres at 0.66 g/t with accompanying silver, lead and zinc. The company has completed 5,700 metres of a planned 25,000-metre phase-two programme, with further assays expected in December.
1. Polymetallic means testwork, not assumptions
Silver, lead and zinc alongside gold change the leaching picture. Base metals can consume reagent and interfere with recovery, so an early result like this is a signal to start bottle-roll and column tests, not to pick a reagent from a catalogue. At this stage the right question is which route — conventional cyanidation or a non-цијанид option — delivers recovery on the actual ore.
Near-surface mineralisation adds a second consideration: oxidation. Weathered material often leaches faster than fresh sulphide ore, but it can also carry clays that complicate solution percolation in a heap. Both factors must be captured in the test programme before a flowsheet is chosen.
2. The early-stage decision sequence
| Фаза | Тест | Одлуката што ја поддржува |
|---|---|---|
| 1 — Characterise | Head assay, acid/base accounting | Reagent demand envelope |
| 2 — Compare routes | Bottle-roll, cyanide vs alternative | Leach chemistry selection |
| 3 — Confirm | Column tests, Јаглерод Вчитување | Heap leaching / Vat leaching fit |
| 4 — Document | Specification dossier | Procurement readiness |
Златниот триаголник — три производи, еден добавувач
AuCyan™ натриум цијанид NaCN (≥98.3%) · AuCarb™ активиран јаглен со кокосова лушпа за обновување на злато (≥99% тврдост) · AuLeach™ средство за испирање на злато (GDA) – неопасен
3. Worked route comparison
Suppose bottle-roll tests on a composite sample show 82% gold extraction with conventional cyanidation at 0.30 kg/t demand, and 74% extraction with a non-cyanide route at 0.45 kg/t demand. The higher-grade route is not automatically the right one. A buyer must value the eight-percentage-point recovery difference against reagent cost, permitting complexity and solution-chemistry risk. In a jurisdiction where cyanide permitting is constrained, the non-cyanide route may still win. The dossier should present both cases side by side.
Conventional route: 82% extraction at 0.30 kg/t demand
Non-cyanide route: 74% extraction at 0.45 kg/t demand
4. Samples before shipments
At exploration stage, scale is small but specification discipline should not be. Complimentary samples of AuLeach™ средство за испирање на злато (GDA) – Неопасен AuCarb™ Gold Recovery активен јаглен со кокосова лушпа (≥99% тврдост) support independent laboratory testing before any commercial commitment. When a project reaches production, commercial volumes start at 1×20' FCL - 18 МТ за AuCyan™ натриум цијанид NaCN (≥98.3%), 15 МТ for carbon and 28 МТ for the leaching agent — under ФОБ/ЦИФ terms, with a batch сертификат за автентичност, Tds МСС in 25 кг ламинирани PE вреќи за тешка употреба. United Chemical им служи на повеќе од 77 земји.
4b. Sample representativity — the first thing to get right
An early-stage resource is heterogeneous by definition, and a bottle-roll result is only as good as the sample behind it. The reported intersections come from reverse-circulation drilling across a 400-metre-by-100-metre corridor with ancient workings and variable oxidation. A single high-grade interval should never become the metallurgical composite. The correct approach is to build composites by domain — oxide versus fresh, gold-dominant versus polymetallic — and to test each separately before blending a weighted average. Duplicate and blank samples should accompany the programme so that assay precision is known before recovery numbers are trusted. This discipline costs little at exploration stage and prevents a costly error later: designing a plant around a recovery figure that was measured on unrepresentative material. The same principle applies to every later stage, from column tests to the first commercial shipment, which is why a supplier's COA and a client's sampling plan are two halves of the same quality system.
4c. Column tests before a heap decision
Bottle rolls answer whether gold can be leached; column tests answer whether it can be leached at the particle size, irrigation rate and solution chemistry a heap will actually use. For near-surface material with clay, percolation is often the binding constraint rather than dissolution chemistry. A column programme should run at several crush sizes and irrigation rates, tracking pregnant-solution grade over time to build an extraction curve. Only then can a Исцедување на купиштата design be sized, and only then can carbon-in-column capacity be specified from the K and R values measured on the real pregnant solution. Rushing this step is the classic way an otherwise sound project arrives at commissioning with a flowsheet that cannot reach its test-work recovery.
5. ЧПП
Q1 — What was the best intercept?
57 m at 1.15 g/t gold from 4 m, with silver, lead and zinc present.
Q2 — Why does polymetallic mineralisation matter?
Base metals consume reagent and can interfere with gold recovery, requiring test work.
Q3 — Which leach route should be chosen?
Only bottle-roll and column comparison on the actual ore can answer that.
П4 — Дали се достапни примероци?
Yes — complimentary samples of AuLeach™ and AuCarb™ for independent laboratory testing.
Q5 — What MOQ and terms apply at production stage?
1×20' FCL — 18 MT цијанид, 15 MT јаглерод, 28 MT средство за испирање — FOB или CIF.
П6 — Која документација се испорачува?
Batch COA, TDS and MSDS in 25 kg heavy-duty laminated PE bags.
Start the metallurgy early
Send head assays from your first holes. We will propose a bottle-roll matrix and provide samples for independent testing.
Контактирајте нѐ · Реагенси за истекување · Преглед на Златниот триаголник · индустрија Вести
WhatsApp +86 173 9270 5576 · info@unitedchemicalcn.com
Sources: Mining.com.au and Orecast, accessed 20 November 2026; company assay results announced week of 18 November 2026.
- Случајна содржина
- Жешка содржина
- Жешка содржина на преглед
- Сулфурна киселина 98% индустриско одделение
- Натриум метал, ≥99.7%
- Индустриски натриум нитрит 98.5%
- Натриум тиосулфат пентахидрат
- Желез хлорид (40% во вода)
- 1Натриум цијанид со попуст (CAS: 143-33-9) за рударство - висок квалитет и конкурентни цени
- 2Натриум цијанид 98.3% CAS 143-33-9 NaCN средство за преработка на злато, неопходен за рударство и хемиска индустрија
- 3Новите регулативи на Кина за извоз на натриум цијанид и насоки за меѓународните купувачи
- 4Натриум цијанид (CAS: 143-33-9) Сертификат за краен корисник (кинеска и англиска верзија)
- 5Меѓународен код за управување со цијанид (натриум цијанид) - стандарди за прифаќање на рудникот за злато
- 6Кинеска фабрика сулфурна киселина 98%
- 7Безводна оксална киселина 99.6% индустриско одделение
- 1Натриум цијанид 98.3% CAS 143-33-9 NaCN средство за преработка на злато, неопходен за рударство и хемиска индустрија
- 2Висока чистота · Стабилни перформанси · Повисока стапка на закрепнување — натриум цијанид за модерно испирање на злато
- 3United ChemicalИстражувачкиот тим на „Студија“ демонстрира авторитет преку увиди засновани на податоци
- 4AuCyan™ високо-перформансен натриум цијанид | 98.3% чистота за глобално рударство на злато
- 5Дигитален електронски детонатор (време на доцнење 0~ 16000ms)
- 6Детонатор со ударна цевка со висока јачина и висока прецизност
- 7индустрија Електричен детонатор





Консултации преку Интернет
Додај коментар: